Brother DCP-540CN - Manual (Page 24)

Chapter 2
18
Loading photo paper
2
Use the photo paper tray which has been
assembled on the top of the paper tray to print
on photo 10
× 15 cm and photo L size paper.
By using the photo paper tray, you do not
have to take out the paper which is put in the
original tray.
a
Press the photo paper tray release
button with your left thumb and push the
photo paper tray (the top part of the tray)
back until it clicks into the photo printing
position.
1 Photo Paper Tray
b
Press and slide the paper side guides
(1) and paper length guide (2) to fit the
paper size.
c
Put the photo paper into the photo paper
tray and gently adjust the paper side
guides to the paper.
Make sure the paper side guides touch
the sides of the paper.
Note
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
d
When you have finished printing photos
return the photo paper tray to the normal
printing position.
Press the photo paper tray release
button with your left thumb and pull the
photo paper tray forward until it clicks.
1
1
2