COATS Kit 85000816, Pressure Limiter - Manual

This is an addendum instruction for the pressure lim-
iter and does not cover the safe operation of the
machine, tire/rim match, or evaluation of safe wheels
and tires, or instructions covering the safe inflation
processes. If you need copies of operating instructions
call 1-800-688-6359 or refer to the internet at
www.ammcoats.com.
Note: Fittings have a sealant coating as purchased. If
absent, be sure to apply teflon tape or thread sealant to
any male threads at installation.
Check connections for zero leakage.
85000817 01 09/08 1 of 2 © COPYRIGHT 2008 HENNESSY INDUSTRIES AND COATS ALL RIGHTS RESERVED PRINTED IN U.S.A.
Pressure Limiter Kit 85000816
For use with COATS Model, 40xx, 90xx, Rim
Clamps, RC15, RC20 and APX Tire Changers
Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565 (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com
ITEM PART NO. DESCRIPTION
1
2
5
3
4
1
APX Series
4050
90xx Series
& Rim Clamp
Tire Changers
RC-15 & 20
4040
Middle Port
IN From
1/4-inch Valve
Pressure Limiter Kit Parts List
Ref# Part No. Description
1 8111255 Spl Tee-1/4 NPT x 3/8 x 1/4 Tube
2 8000372 1/4" x 90˚ Street ELL
3 8181987 1/8 NPT x 1/8 Tube Str. Ftg.
4 871101642 1/4 NPT Strt Tee Fitting
5 8000378 1/4" Brass St. Fitting