COATS Application Chart, Balancing Solutions - Manual (Page 12)

COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565 • (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.Hennessy-Ind.com
The bolt circle information appearing on this chart is copyright © 2001 by ADP Claims Solutions Group, Inc. All rights reserved.
© Copyright 2001 HENNESSY INDUSTRIES and COATS, Inc. All rights reserved. Printed in U.S.A.
Hennessy Industries has made a reasonable effort to ensure that the information in this chart is correct
and cannot be held responsible if any inaccuracy exists. All rights reserved. rev. 0, 08/01
Balancing Solutions
Application Chart Glossary
®
Pin-Plate™
Balancing Solutions
Page 12 of 12
8113213
Fixed Finger Plate, FFP1b, 4x100MM
& 4x108MM, 4 Tapered Fingers,
40MM I.D.
8113214
Fixed Finger Plate, FFP2b,
4x114.3MM & 4x108MM, 4 Tapered
Fingers, 40MM I.D.
8113215
Fixed Finger Plate, FFP3b, 5x100MM
& 5x108MM, 5 Tapered Fingers,
40MM I.D.
8113216
Fixed Finger Plate, FFP4b,
5x114.3MM & 5x108MM, 5 Tapered
Fingers, 40MM I.D.
8113217
Fixed Finger Plate, FFP5b, 5x115MM
& 5x120.65MM, 5 Tapered Fingers,
40MM I.D.
8113218
Fixed Finger Plate, FFP6b, 5x112MM
& 5x130MM, 5 Ball Seat Fingers,
40MM I.D.
8113219
Fixed Finger Plate, FFP7b, 5x120MM
& 5x127MM, 5 Tapered Fingers,
40MM I.D.
8183849
Stud-Plate Adapter, 8x6.5" Bolt Circle,
40MM I.D., Used on Light Truck
Wheels
8183850
Stud-Plate Adapter, 8x6.5" Bolt Circle,
1.125" (28MM) I.D., Used on Light
Truck Wheels
8308095
Cone, Light Truck - 1.125" (28MM)
I.D., Range: 3.375-5.00" (85.73-
132.08MM)