CiDRA Passive Sonar Transmitters - Manual (Page 8)

1.2.3 MODBUS Options
1.2.3.1 Device Address
Device Address is the address that a Modbus master will use to
communicate with the transmitter.
•
Range: 1 – 247 (Default = 1)
1.2.3.2 ASCII Timeout
ASCII Timeout is the amount of time in seconds the transmitter will
wait before processing an ASCII Transmission Mode Modbus
message before a CR/LF termination. This may be increased to allow
for manual entry of an ASCII message on a terminal.
•
Range: 1 – 99 Seconds (Default = 4)
20959-01 Rev 02 Page 1-5