CHAMPION IUH351 - Manual (Page 8)

2
Installation
Electrical Connections
WARNING:
Electrocution or serious injury may result when working on an
energized circuit.
Disconnect power at the main breaker or service disconnect
switch before working on the circuit.
Lock-out and tag the breaker to indicate that work is being
performed on the circuit.
The Main Terminal Block (MTB) is located on the left-rear corner
of the electrical panel.
ATTENTION
A qualified electrician must connect the main incoming power to the dishwasher in accordance
with all local codes and regulations .
Main Terminal Block
VERIFY THE CORRECT VOLTAGE IS SUPPLIED TO THE MACHINE
THE CORRECT SUPPLY VOLTAGE IS/208-240VAC/50/60/1.
(See the diagram on next page.)