CHAMPION EUCCW Series - Manual (Page 42)

34
Installation Instructions _______

Section Assemby
Section Assemby
21. The Installation Supervisor must
inspect the position, level and
proper connection of the piping
connections.
22. Section joints must be capped by
section u-clips and silicon must
be trimmed around the hood
joints.
23. Steam supply and condensate
unions must be tight.
24. Drain piping must be checked.
25. Cross-flow hoses must be
inspected and clamps tightened.
26. Flushing nozzle piping on the
load end must be inspected.
20. The installation is close to
completion.