CCTV Camera Pros iDVR-PRO H Series DVRs - Manual (Page 68)

System Setting
68 |
System Setting
System
i
BOOTING EVENT: This event occurs when the
DVR is booting.
i
LOGIN FAIL EVENT: This event occurs when the
DVR fails to log in.
You can specify the times of clicking < > to
trigger the event.
i
FAN FAIL EVENT : This event occurs if the CPU
cooling fan or unit's cooling fan does not work at all.
If the fan fails, no recording will proceed by the DVR. If you
encounter a fan failure, contact the retailer or the service
center for technical assistance.
J To monitor the normal operation of the DVR, it is
recommended not to change the buzzer output settings of the fan failure event and the temperature fail event.
Network
i
TROUBLE IN INTERNET CONNECTION : Occurs
if the Internet connection to the DVR fails.
If you do not want to connect the DVR to the
network, leave the item blank.
i
FAIL IN REMOTE LOGIN : This event occurs if a
remote client fails to log in due to an invalid ID or
password.
You can specify the times of clicking < > to
trigger the event.
i
FAIL IN DDNS UPDATE : This event occurs if the
DVR tried to update the DDNS address but failed.
If the DDNS address fails to be updated, the DVR may not
connect to a remote client. If this is the case, enter the IP
address from the client side to allow access from the DVR. This is just a temporary measure.
For the IP address, move to and check from the window. Note that the
ADDRESS> is subject to change if the DVR does not use the static IP.
J Note that the can change at any time in a dynamic IP environment.