Carbolite CAF DIGITAL IMAGING - Manual (Page 7)

CAF Digital Imaging
MF36-3.21
page 7
3.0 I NSTALLATION I NSTRUCTIONS .
The furnace contains electrical parts and should be stored and used in indoor conditions as
follows:
temperature: 5°C - 40°C
relative humidity: maximum 80% up to 31°C decreasing linearly to 50% at 40°C
3.1 Unpacking & Handling.
This furnace is heavy, take appropriate precautions when lifting or moving it and use a sufficient
number of people.
When unpacking or moving the furnace always lift it by its base. Never lift it by any attachments
or protruding parts. Avoid applying force to internal components such as the work tube or
insulation.
3.2 Packing List.
The packaging should contain the following components:
1 off Furnace assembly.
1 off Work tube and back seal assembly, see fig 2.
1 off Work tube front insulating collar.
1 off Work tube gasket.
1 off Front tube seal assembly, see fig 3.
1 off Door arm assembly (without door plug), see fig 4.
1 off Door plug, see fig 4.
1 off Flexible gas pipe.
1 off Camera mounting bracket, see fig 5a.
1 off Standard lens and camera assembly, see fig 5b.
1 off Zoom lens assembly and lens clamp, see fig 5g.
if supplied
1 off Zoom lens mounting bracket. if supplied
6 off Panel hole blanking plugs.
5 off Cable ties.
1 off Sample Carrier.
100 off Sample tiles.
1 off Sample loading tool.
1 off ‘Window retaining ring’ spanner.
1 off Cone mould.
1 off 150mm length of Gold wire (1063°C fuse wire).
1 off 150mm length of Palladium wire (1554°C fuse wire).
1 off Carbon Monoxide monitor.
1 off RS 232 Interface cable.
1 off Camera video extension cable.
1 off Computer.
1 off Monitor.
1 off Keyboard.
1 off Mouse.
1 off Carbolite software protection dongle.
2 off Computer power cables.
1 off Set - Computer operating instructions.
1 off Installation, Operating & Maintenance Instructions for the CAF Test Furnace.