APG DCR-1006 user manual - Manual (Page 32)

DCR-1005 and DCR-1006 Rev. A4, 10/08
32
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
• Maintenance
The DCR-1005 /1006 controller and DST sensors do not require maintenance.
However, a periodic visual inspection of the system would be in order.
The DST should be kept as clean as possible for optimum performance. Dust
buildup may be removed from the transducer with a cloth or by low pressure air.
The DST housing can be cleaned with soap and water.
If the DST is visibly affected by the environment, a different type of
transducer may be required.