APG DCR-1006 user manual - Manual (Page 28)

DCR-1005 and DCR-1006 Rev. A4, 10/08
28
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Utilities
Input Select
Allows the customer to use either a DST type sensor or other APG sensors
with a pulse width output (digital) to drive the display.
MODE DESCRIPTION PARAMETERS EXPLANATION
40 Input Select Range = 0,1 Selects which type of
0 = DST Sensor sensor input to accept.
1 = Pulse Width
Default = 0
Reset
When the DCR is powered up, ‘0’ is loaded in mode 41. This saves the user-
selected modes into the DCR. If the mode adjustments get scrambled or if the
factory preset values are wanted, press the V-UP. If “1” is entered into this
mode, all of the parameters will be “RESET” to their factory defaults.
MODE DESCRIPTION PARAMETERS EXPLANATION
41 Reset Range = 0,1 Entering a 1 here will
Default = 0 reset the DST to its
factory default values.
Software Version
Mode 42 displays the software version for the DCR. The value corresponds
to the operating version and the approximate date of manufacture.
MODE DESCRIPTION PARAMETERS EXPLANATION
42 Software Displays the software
Version version