APG DCR-1006 user manual - Manual (Page 29)

Rev. A4, 10/08 DCR-1005 and DCR-1006
29
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Extended Range
Modes 43 - 44 allows the DCR to display ranges greater than 50 ft. These
modes are enabled only in DST’s with extended range.
MODE DESCRIPTION PARAMETERS EXPLANATION
43 Range Range = 0,1 Some DSTs will allow a
Selection 0 = 1 - 35 ft. Range detection range of up to
1 = 1 - 72 ft. Range 72 ft. This parameter
Default = 0 enables the DCR to
display that distance.
44 Maximum Range = 1 - 72 ft. This parameter works
Range Default = 35 ft. only with 72 ft. DSTs and
enables the user to limit
the maximum distance.
AutoSense
Modes 45 disables or enables the AutoSense feature on selected models.
MODE DESCRIPTION PARAMETERS EXPLANATION
45 AutoSense Range 0,1 Sensors with the extended
0 = OFF range software can have
1 = ON the AutoSense feature
Default = 0 disabled or enabled.