Scepter rack – Allen&Heath Scepter USER GUIDE User Manual

Page 18

Audio Owner Manual

Section 2

AUX

MONO

MONITOR

SELECT

O N

SCEPTER

RACK

HEADPHONES

FRONT PANEL CONTROLS MASTER SECTION

MONITOR SELECT and LEVEL

This section selects the signal to the HEADPHONE OUTPUT
on the front panel and the MONITOR OUTPUT on the rear

panel. It also routes the selected signal to the LED Meter
section of the mixer. If no switches are engaged (and no PFL
LED illuminated), this signal is the LEFT/RIGHT output of the

console. When a switch within the monitor section is selected, it
automatically routes to the Headphone Output, Monitor Output,

and Meters. In the event that multiple switches are selected, the

switch closest to the BOTTOM of the panel has priority. When
ANY PFL switch is selected, the PFL ON LED indicator is
illuminated, and this signal has priority over any other switch
position. When illuminated, the PFL signal is present in the

Headphones, Monitor output, and visually on the LEFT/RIGHT

meters.

HEADPHONE JACK

Accepts stereo headphones of 75. ohms or greater. Output
determined by the Monitor Select section. Headphone level is
controlled by the front panel control labeled LEV (Monitor

Level).