Allen&Heath Scepter USER GUIDE - Manual (Page 17)

Audio Owner Manual Section 2
12v
LAMP
A
B 4 5 6
AUX MASTERS
STEREO OUT
MUTE
MONO OUT
1. 12V LAMP
BNC Connector to accept most of the popular goose neck
lamps to illuminate the mixer work area.
2.
Master power switch for 48 Volt PHANTOM POWER (for use
with CONDENSER microphones).
3. PHANTOM POWER LED
Indicates that the Master Phantom Power switch is turned on
and phantom power is present in the mixer.
4. POWER ON LED
Indicates that power is on to the mixer. In the event that this
LED is not illuminated, check that the external power supply is
plugged into the mixer and the power supply is plugged into an
operational wall outlet.
5. AUX MASTERS A, C, D
The master output level controls for auxiliary mixes A, B, C, and
D.
6. STEREO OUT
Master level control for an stereo output. Signal for this
output is derived from the stereo mix prior to the Master
Right slide faders (see USER OPTIONS) A.MUTE switch is
provided.
7. MONO OUT
FRONT PANEL CONTROLS MASTER
SECTION
Master level control of the MONO output. Signal for this output
is a mono sum of the stereo mix prior to the Master
slide faders (see USER CONFIGURED OPTIONS). A MUTE
switch is provided.
12