AirLive WL-5470AP - Manual (Page 39)

AirLive WL_5470AP User’s Manual
34
4.8 WISP + Universal Repeater Mode Setting
Alias Name You can set the alias name for this device. limited not exceed 32
characters
Disable Wireless
LAN Interface
Check the box to disable the Wireless LAN Interface, by so doing, you won’t be
able to make wireless connection with this Access Point in the network you are
located. In other words, this device will not be visible by any wireless station.
Band You can choose one mode of the following you need.
~ 2.4GHz (B): 802.11b supported rate only.
~ 2.4GHz (G): 802.11g supported rate only.
~ 2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate. The
default is 2.4GHz (B+G) mode.
SSID The SSID differentiates one WLAN from another; therefore, all access points and
all devices attempting to connect to a specific WLAN must use the same SSID. In
WISP mode, you have to enter the WISP Outdoor AP
SSID manually or click the “site survey” button to connect and get
SSID automatically.
Site Survey Please refer the Client mode settingsÆ Site Survey for details.
SSID of extended
Interface
Please refer the Universal repeater mode settingsÆ SSID of extended Interface
for details.
MAC Clone Address Enter the MAC Address of Single Ethernet Client.