AirLive WL-5470AP User Manual
Page 30
AirLive WL_5470AP User’s Manual
25
Site Survey
Site survey displays all the active Access Points and IBSS in the neighborhood.
You can select one AP to associate. Press Site Survey button to search the
wireless device that this client want to connect.
Channel Number
Allow user to set the channel manually or automatically.
If set channel manually, just select the channel you want to specify.
If “Auto” is selected, user can set the channel range to have Wireless Access Point
automatically survey and choose the channel with best situation for
communication. All stations communicating with the Access Point must use the
same channel.
when setup infrastructure of Client mode, the channel number can not
Be changed. You have to go to AP mode to change the channel number
Auto MAC Clone
Check the box to enable MAC Clone for Single Ethernet Client.
Manual MAC Clone
Address
Enter the MAC Address of Single Ethernet Client.
Security
Please refer the AP mode settingsÆ Security for details.
In client mode are not supported with RADIUS 802.1x authentication.
Advance Setting
Please refer the AP mode settingsÆ Advance Setting for details.