AirLive WL-5470AP - Manual (Page 14)

AirLive WL_5470AP User’s Manual
9
3.5 WDS Repeater Mode
A repeater's function is to extend the wireless coverage of another wireless AP or router.
For WDS repeater to work, the remote wireless AP/Router must also support WDS function.
To set the operation mode to “WDS Repeater”, Please go to “Mode JWDS Repeater” and click the Setup
button for configuration.
3.6 Universal Repeater Mode
A universal repeater can also extend the wireless coverage of another wireless AP or router. But the
universal repeater does not require the remote device to have WDS function. Therefore, it can work with
almost any wireless device.
Note: When you are using the universal repeater mode, please make sure the remote AP/Router‘s WDS
function is turned off.