AirLive WL-5470AP - Manual (Page 32)

AirLive WL_5470AP User’s Manual
27
Advance Setting Please refer the AP mode settingsÆ Advance Setting for details.
AP MAC address Enter 12 digits in hex numbers in the AP MAC address (BSSID) field and press the
Add MAC Address Button to associate with other’s Wireless access point.
Before you want to use bridge mode to connect each other to provide
A wireless bridge between 2 remote LANs, you need add the BSSID of other’s
wireless AP first.
Site Survey Site survey displays all the active Access Points and IBSS in the neighborhood.
Press Site Survey button to search the wireless device.
Add MAC Address Enter MAC address of remote access point.
Reset Press to discard the data you have entered since last time you press Apply
Change.
Show Statistics List all packets information of traffic.
Delete Selected To delete bridge from access to this Access Point, you may firstly check the Select
checkbox next to the MAC address and Comments, and press Delete Selected.
Delete All To delete all the clients from access to this Access Point, just press Delete All
without selecting the checkbox.