AirLive WL-5470AP - Manual (Page 29)

AirLive WL_5470AP User’s Manual
24
4.3 Client Mode Setting
Alias Name You can set the alias name for this device. limited not exceed 32 characters.
Disable Wireless
LAN Interface
Check the box to disable the Wireless LAN Interface, by so doing, you won’t be
able to make wireless connection with this Access Point in the network you are
located. In other words, this device will not be visible by any wireless station.
Band You can choose one mode of the following you need.
~ 2.4GHz (B): 802.11b supported rate only.
~ 2.4GHz (G): 802.11g supported rate only.
~ 2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate. The
default is 2.4GHz (B+G) mode.
Network Type Client mode have two Network type :
Infrastructure
A wireless network that is built around one or more access points, providing
wireless clients access to wired LAN or Internet service. It is the most popular
WLAN network structure today.
AdHoc wireless network do not use wireless AP orrouter as the central hub of the
network. Instead, wireless client are connected directly to each other.
SSID The SSID differentiates one WLAN from another; therefore, all access points and
all devices attempting to connect to a specific WLAN must use the same SSID. It is
case-sensitive and must not exceed 32 characters. A device will not be permitted
to join the BSS unless it can provide the unique SSID. An SSID is also referred to
as a network name because essentially it is a name that identifies a wireless
network.