beautypg.com

Chapter iv: configuration – AirLive WL-5470AP User Manual

Page 18

background image

AirLive WL_5470AP User’s Manual

13

Chapter IV: Configuration

1.

Start your computer. Connect an Ethernet cable between your computer and the Wireless Access Point.

2.

Make sure your wired station is set to the same subnet as the Wireless Access Point, i.e. 192.168.100.X

3.

Start your WEB browser. In the Address box, enter the following:

http://192.168.100.252/

The configuration menu is divided into five categories:

Mode, Status, TCP/IP, Reboot and Other.

Click on the desired setup item to expand the page in the main navigation page. The setup pages

covered in this utility are described below.













See also other documents in the category AirLive Routers: