AirLive SNMP-24MGB - Manual (Page 53)

4. Web Management in SNMP-24MGB
AirLive SNMP-24MGB v2 User’s Manual 46
Parameter description:
Power Saving:
The parameter will enable or disable to verify switches have the ability to consider
the length of any Ethernet cable connected for adjustment of power usage
accordingly. Shorter lengths require less power. link-down mode removes power
for each port that does not have a device attached. Default is Disable.
4.4 VLAN
The switch supports Tag-based VLAN (802.1Q) and Port-based VLAN. Support 4094
active VLANs and VLAN ID 1~4094
. VLAN configuration is used to partition your LAN into
small ones as your demand. Properly configuring it, you can gain not only improving
security and increasing performance but greatly reducing VLAN management.
4.4.1 VLAN Mode
Function name:
VLAN Mode Setting
Function description:
The VLAN Mode Selection function includes five modes: Port-based, Tag- based,
Metro Mode, Double-tag and Disable, you can choose one of them by pulling down list
and selecting an item. Then, click <Apply> button, the settings will take effect
immediately.
Parameter description:
VLAN Mode: