AirLive SNMP-24MGB User Manual

Page 32

Text mode
Original mode

4. Web Management in SNMP-24MGB

AirLive SNMP-24MGB User’s Manual

IP Configuration

Function description:

Set IP address, subnet mask, default gateway and DNS for the switch.

Parameter description:

DHCP Setting:

The switch supports DHCP client used to get an IP address automatically if you
set this function “Enable”. When enabled, the switch will issue the request to the
DHCP server resided in the network to get an IP address. If DHCP server is down
or does not exist, the switch will issue the request and show IP address is under
requesting, until the DHCP server is up. Before getting an IP address from DHCP
server, the device will not continue booting procedures. If set this field “Disable”,
you’ll have to input IP address manually. For more details about IP address and
DHCP, please see the Section 2-1-5 “IP Address Assignment” in this manual.

Default: Disable