AirLive SNMP-24MGB - Manual (Page 151)

4. Web Management in SNMP-24MGB
AirLive SNMP-24MGB v2 User’s Manual 144
together the ports whose peer link partners are all on a single system. Each system
supports LACP will be assigned a globally unique System Identifier for this purpose. A
system ID is a 64-bit field comprising a 48-bit MAC Address and 16-bit priority value.
The System Priority can be set by the user. Its range is from 1 to 65535. Default: 32768
Parameter description:
System Priority:
Show the System Priority part of a system ID.(1-65535)
4.13 STP Configuration
The Spanning Tree Protocol (STP) is a standardized method (IEEE 802.1D) for avoiding
loops in switched networks. When STP is enabled, ensure that only one path is active
between any two nodes on the network at a time. User can enable Spanning Tree
Protocol on switch’s web management and then set up other advanced items. We
recommend that you enable STP on all switches to ensure a single active path on the
network.
4.13.1 STP Status
Function name:
STP Status
Function description:
In the Spanning Tree Status, user can read 12 parameters to know STP current status.
The 12 parameters’ description is listed in the following table.