AirLive SNMP-24MGB User Manual
Page 143
4. Web Management in SNMP-24MGB
AirLive SNMP-24MGB v2 User’s Manual
136
parameters which are Port control, reAuthMax, txPeriod, Quiet Period,
reAuthEnabled, reAuthPeriod, max. Request, suppTimeout, serverTimeout and
Controlled direction.
Mode:
Range: Disable / Normal / Advanced / Clientless
Disable:
Disable IEEE 802.1X for this port.
Normal:
All clients under this port will be authorized when one of the client do 802.1X
authentication successfully.
Advanced:
Each client under this port have to do 802.1X authentication by himself.
Clientless:
The clients don’t need to install 802.1X client function that means the client
PC (for example WINDOW XP) does not need to enable 802.1 X client
function also can do 802.1 X authentication. But the network maintainer
needs to configure the Radius server using each client’s MAC address for
Radius account ID and password.
Port Control:
This is used to set the operation mode of authorization. There are three type of
operation mode supported, ForceUnauthorized, ForceAuthorized, Auto.
y
ForceUnauthorized:
The controlled port is forced to hold in the unauthorized state.
y
ForceAuthorized:
The controlled port is forced to hold in the authorized state.
y
Auto:
The controlled port is set to be in authorized state or unauthorized state
depends on the result of the authentication exchange between the
authentication server and the supplicant. Default: Auto
reAuthMax(1-10):
The number of authentication attempt that is permitted before the port becomes
unauthorized.
Default: 2
txPeriod(1-65535 s):
A time period to transmitted EAPOL PDU between the authenticator and the
supplicant. Default: 30