AirLive SNMP-24MGB - Manual (Page 20)

3. Configuring the SNMP-24MGB
13
AirLive SNMP-24MGB User’s Manual
After finishing the parameter settings, click “OK“. When the blank screen shows up,
press Enter key to bring out the login prompt. Key in the “admin“(default value) for the
User name and “airlive” for the Password (use Enter key to switch), then press Enter
key and the Main Menu of console management appears. Please see below figure for
login screen.
„ Telnet Management (Terminal): SNMP-24MGB can be managed through telnet. To
Baud Rate: 115200 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None