AirLive SNMP-24MGB - Manual (Page 195)

5. CLI Management in SNM-24MGB
AirLive SNMP-24MGB v2 User’s Manual 188
Argument:
None.
Possible value:
None.
Example:
SNMP-24MGB# ip
SNMP-24MGB(ip)# help
Commands available:
------------<< Local commands >>------------
set ip Set ip,subnet mask and gateway
set dns Set dns
enable dhcp Enable DHCP, and set dns auto or manual
disable dhcp Disable DHCP
show Show IP Configuration
------------<< Global commands >>------------
exit Back to the previous mode
end Back to the top mode
help Show available commands
history Show a list of previously run commands
logout Logout the system
save start Save as start config
save user Save as user config
restore default Restore default config
restore user Restore user config
history
Syntax:
history [#]
Description:
To show a list of previous commands that you had ever run.
When you enter this command, the CLI would show a list of commands which you had
typed before. The CLI supports up to 256 records. If no argument is typed, the CLI would
list total records up to 256. If optional argument is given, the CLI would only show the last