AirLive SNMP-24MGB - Manual (Page 134)

4. Web Management in SNMP-24MGB
127
AirLive SNMP-24MGB User’s Manual
Parameter description:
Port #
:
1-24
Binding Enabled:
Use the switch ACL function to support IP/MAC Binding function, the maximum is
up to 128 entries.
Source MAC Address:
xx-xx-xx-xx-xx-xx. For example: 00-40-c7-00-00-01
Source IP Address:
xxx.xxx.xxx.xxx. For example: 192.168.1.100
4.10 IP MAC Binding
The IP network layer uses a four-byte address. The Ethernet link layer uses a six-byte MAC
address. Binding these two address types together allows the transmission of data between
the layers. The primary purpose of IP-MAC binding is to restrict the access to a switch to a
number of authorized users. Only the authorized client can access the Switch’s port by
checking the pair of IP-MAC
Addresses and port number with the pre-configured database. If an unauthorized user tries
to access an IP-MAC binding enabled port, the system will block the access by dropping its
packet.
4.10.1 IP MAC Binding Configuration
Function name:
IP MAC Binding Configuration