AirLive SNMP-24MGB - Manual (Page 174)

4. Web Management in SNMP-24MGB
167
AirLive SNMP-24MGB User’s Manual
Parameter description:
MVID:
The switch supports two kinds of options for managed valid VLAN VID, including
“Client” and “router”. Default is “Disable”. When you choose “Client”, you can fill in
MVID number. The valid VID range is 1~4094.
Port:
The switch supports two kinds of options for managed valid port range, including
“Client” and “router”. Default is “Disable”. You can select the ports that you would
like them to be worked and restricted in the allowed group configuration if ”client”
had been chosen.
4.16.7 Group Allow
Function name:
Group Allow
Function description:
The Group Allow function allows the IGMP Snooping to set up the IP multicast table
based on user’s specific conditions. IGMP report packets that meet the items you set
up will be joined or formed the multicast group.