AirLive SNMP-24MGB - Manual (Page 180)

4. Web Management in SNMP-24MGB
173
AirLive SNMP-24MGB User’s Manual
Parameter description:
DHCP Snooping state: The parameter which set to disabled or enabled the DHCP
snooping function on the switch, the default is Disabled.
Note: To click <Apply > when you finish the configuration.
4.18.2 DHCP Snooping Entry
Function name:
DHCP Snooping Entry
Function description:
DHCP snooping Entry allows a switch to add the a trust DHCP server and 2 trust port
to build the DHCP snooping available entry. This information can be useful in tracking
an IP address back to a physical port and enable or disable the DHCP Option 82.
Parameter description:
VID:
When DHCP snooping is enabled, and enabled on the specified VLAN, DHCP
packet filtering will be performed on any un-trusted ports within the VLAN. It set a
available VLAN ID to enable the DHCP snooping on VLAN interface.
Trust Port 1:
If DHCP snooping is enabled globally, and also enabled on the VLAN
where the DHCP packet is received, all DHCP packets are forwarded for a trusted
por. It set a trust port 1 available port from 0 to 24. 0 is disabled.