AirLive SNMP-24MGB - Manual (Page 35)

4. Web Management in SNMP-24MGB
AirLive SNMP-24MGB v2 User’s Manual 28
Parameter description:
Port No:
Display the port number. The number is 1 – 24.
Detection Port - Enable:
When Port No. is chosen, and enable port's Loop detection, the port can detect
loop happens. When loop happen, port will be locked. If loop did not happen,
port maintains Unlocked.
Locked Port - Resume:
When choosing Resume, locked port will be opened and turned into unlocked. If
not choosing Resume, Port maintains locked.
4.2.6 Management Policy
Through the management security configuration, the manager can do the strict setup to
control the switch and limit the user to access this switch.
The following rules are offered for the manager to manage the switch: