AirLive POE-FSH1008AT - Manual (Page 50)

4. Web Management
AirLive POE-FSH1008AT User’s Manual
45
 STP Mode: Disable, STP and RSTP. Select the STP version you want to enabled.
 Bridge Priority: This parameter configures the spanning tree priority globally for this
switch. The device with the highest priority becomes the STP root device. However, if
all devices have the same priority, the device with the lowest MAC address will then
become the root device. Number between 0 - 61440 in increments of 4096. Therefore,
there are 16 distinct values.
 Hello Time: Interval (in seconds) at which the root device transmits a configuration
message (BPDU frame). Number between 1-10 (default is 2).
 Max Age – The maximum time (in seconds) a device can wait without receiving a
configuration message before attempting to reconfigure. That also means the
maximum life time for a BPDU frame. Number between 6-40 (default is 20).
 Forward Delay: The maximum time (in seconds) the root device will wait before
changing states (i.e., discarding to learning to forwarding). Number between 4
– 30
(default is 15)
Click Update to have the configuration take effect.
The below table shows the Bridge Status and Root Switch's Status. The Bridge Status
shows the STP configuration of the switch. The Root Status shows the Root Switch's
Information of the STP domain.