AirLive POE-FSH1008AT User Manual
Page 40
4. Web Management
AirLive POE-FSH1008AT
User’s Manual
35
VID Source Port: This table allows you to configure PVID of the port. Select the port
number while you add VLAN and select VLAN member ports, the selected ports' PVID
will be the VID you typed.
* Please note that one port only can have one PVID. While one port joins multiple VLAN
groups, the PVID is important to identify where the incoming traffic will be forwarded to
.
For example: Port 3 is the member of VLAN 100 and 200, PVID of it is 100. The traffic
received from the connected PC is usually untagged; the incoming packets will then be
tagged with PVID within the switch and then follow the VID table to forward traffic.
Port VID Map: This table shows the PVID of the ports.
VLAN Member Table: This table shows the VID and its member ports.
Configuration Steps:
First, add your VLAN Groups (identified throughout your network by unique and constant
numbers). Start with IDs from 100 and up is often. Starting with 100 gives you enough free
room and less compatibility issues.
Second, enter “100” in the field right of VID Setting, then select or deselect which ports are
member of that group. Your up and downlink ports need to be the member of every existing
group. If the port joins different VLAN groups, the VID Source Port allows you to define the
PVID.