AirLive POE-FSH1008AT - Manual (Page 49)

4. Web Management
AirLive POE-FSH1008AT User’s Manual
44
 Function Enable: To Enable or Disable the function.
 Port Filtering Rule: The outgoing packet with selected protocol will be either
forwarded or dropped at secure WAN port as the figure shown below.
 "Negative" means the selected protocol will be dropped and other protocols will be
forwarded.
 "Positive" means the selected protocol will be forwarded and other protocol will be
dropped.
 Protocol: Select the pre-defined known protocol or User_Define Protocol number.
 Secure WAN Port: The port number of the Secured WAN Port. The secured WAN port
is the Egress Port. The configured limit packet will be dropped.
Click Update to have the configuration take effect.
4.11 Spanning Tree
The switch supports IEEE 802.1D-2004 RSTP protocol, the RSTP protocol can backward
compatible to legacy Spanning Tree Protocol (STP) and 802.1w Rapid Spanning Tree
Protocol (RSTP).
4.11.1 STP Bridge Settings
The Table allows you to configure STP Mode and the system time settings.