AirLive POE-FSH1008AT - Manual (Page 31)

4. Web Management
AirLive POE-FSH1008AT User’s Manual
26
The broadcast packet is only checked at the selected port and the number of broadcast
packets is counted in every time unit. One time unit is 500 us for 10Mbps speed and 5ms
for 100Mbps. The excessive broadcast packet will be discarded. For those broadcast
packets incoming from the un-selected port, the switch treats it as the normal traffic.
 Threshold: Type in the threshold in the range between 1 and 63 to limit the maximum
byte counts, which a port can send or receive in a period of time.
 Enable Port: Having ticked the boxes, the port will stop transmitting or receiving data
when their sending byte counts or receiving byte counts reach the defined threshold.
Click Update to have the configuration take effect.
Example to change one time unit to pps:
The port 1 is 100M port. The one time of it is 500us, it indicates there are 2,000packets can
be sent within one second. While type 10 to port 1, that means 10x2000 packets can be
sent in one second.
4.6 PoE with Device Guard
There are many PoE functions can be set when you click the PoE including the PoE Setting,
PoE Power Delay, PoE secluding and Device Guard
Device Guard function can monitor PoE IP cameras and Access Points activities. When
device crashed or not responding, it will reboot the device automatically.