AirLive POE-FSH1008AT - Manual (Page 20)

4. Web Management
AirLive POE-FSH1008AT User’s Manual
15
IP Address: 192.168.2.50
Subnet Mask: 255.255.255.0
Gateway: 192.168.2.1
Click “OK” after finish entering the IP.
* Note1: The POE-FSH1008AT has DHCP client ability. This allows DHCP server (or router)
to assign IP automatically. However, we do not recommend turning on the DHCP client
because the DHCP server assign the IP randomly. The DHCP client should be used only
when connecting directly to Cable Modem (for remote management) whose service
provider uses DHCP for IP assignment.
Now, you will be able to access the switch by typing in the switch’s IP address on the web
browser.
4.2 Remote Management
In this section, you will learn how to setup your computer and the router for remote web
management. Remote management allows MIS to manage a switch from outside of the
switch’s IP domain or from Internet. Depending on the type of Internet connection you have,
there are two ways to setup the switch to be available through Internet.
Direct Connection to Internet
If you have a fixed IP xDSL account or cable modem account, and there is no router in the
network, you can connect your switch directly to Internet via xDSL modem/Cable Modem.
However, this method is not recommended as the LAN will be directly exposed to the
Internet.