Smtp/pop3 basic configuration – step by step – 2N VoiceBlue MAX v1.1 User Manual
Page 66
66
1.
a.
b.
2.
a.
b.
c.
3.
SMTP/POP3 Basic Configuration – Step by Step
This section helps you define the
basic parameters for SMS
2N VoiceBlue MAX
®
sending/receiving via SMTP/POP3. Read the
subsection carefully before
setting details.
shows sending/receving SMS via SMTP/POP3. Having created user accounts
Figure 1
in
, the users can access the accounts via the e-mail client and
2N VoiceBlue MAX
®
send SMS messages to
via SMTP. The gateway receives the
2N VoiceBlue MAX
®
messages and resends them to the GSM users according to the predefined routing
rules.
A message coming to
from GSM is routed according to the
2N
VoiceBlue MAX
®
incoming SMS rules and delivered to the user via POP3.
SMTP/POP3 Communication
Figure 1:
Note
You can send an SMS message of any length to up to 100 users
at the same time from the e-mail client. The maximum SMS
count per e-mail is only limited by the
–>
User group
General
–>
settings.
settings SMTP
Maximum SMS per email
Take the following basic steps in
to enable SMS
2N VoiceBlue MAX
®
sending/receiving:
In the
menu:
Monitoring–>SMS grouping
Assign the selected GSM modules to the SMS groups (according to the GSM
provider and SIM cards with identical tariffs, for example).
Assign the SMS groups created in step 1.a above to the User groups if you
use messaging with different routing rules to different company
departments, for example.
Add users in the
menu:
Monitoring–>Users–>Add
Assign the user to a
.
User group
Set
.
Access type: Email(SMTP/POP3)
Define the
and
to log in to the
Login name (without domain)
Password
SMS server via your e–mail client.
Set the Domain in the Messaging–>User Group–>General settings–>Email