Users, User group – 2N VoiceBlue MAX v1.1 User Manual

Page 58

Users

This section helps you manage the SMS users. Select a communication protocol for
user adding (SMTP/POP3 or SMPP).

Add user

assign the user to a User group.

User group –

define the system user name.

User full name –

define the number (CPN) to which the user's

Replace dial for outgoing SMS –
outgoing SMS messages shall be sent.

select the communication protocol for SMS processing:

Access type –

define the login name for the client Email.

Login name (without domain) –

Email (SMTP/POP3)

–

use SMTP for SMS sending and POP3 for SMS

receiving.

– set the GSM gateway into the 'SMS centre' mode.

SMPP (SMSC)

– set the GSM gateway into the 'ESME - External Short

SMPP (ESME)
Messaging Entity' mode.

SMSC user ID.

System ID –

SMSC/SMTP user password.

Password –

ESME user ID.

System ID (for authentication on remote side) –

ESME user ID.

Password (for authentication on remote side) –

set the TCP parameter into the client/server mode.

TCP type –

set the server IP address and TCP server transport port.

Server address –

set the ESME user details:

Message direction of Esme –

Transceiver

– ESME works as a transmistter/receiver.

ESME works as a transmitter.

Transmitter –

ESME works as a receiver.

Receiver –
Address range – set this parameter if required so by SMSC for SMS
receiving.

User Group

This section helps you edit the User group and set the routing rules for the group's
incoming and outgoing SMS.