2N VoiceBlue Next v3.0 - Manual (Page 83)

External SMS Control 4.8
83
4.8 External SMS Control
If this function is enabled for the active Telnet session, the GSM gateway
automatically sends information on an incoming SMS message. An SMS message can
also be sent using special commands.
Command Description
AT „basic keep alive‟ command (answer „OK‟)
AT!G=A6 Activation of SMS control
(can be activated only in one session at same
time)
AT!G=A55 Deactivation of SMS control
AT^MS=ch GSM module [ch] status
AT^MI=ch GSM module [ch] info
AT^SX=ch Request to list all SMS messages and status
confirmations saved in the SIM card / GSM
module. Possible answers: *smserr(busy,list) or
*smsinc (ix=1-255) for each saved SMS or status
SMS. End of list or empty storage -
*smsinc(ix=0), or *smserr 255
ST^SR=ch,ix Request to read an SMS message or SMS status
saved on the SIM card. Possible answers: *smserr
(busy,read) or *smspdu
AT^SD=ch,ix Request to delete an SMS message (or SMS
status message). Possible answers: *smserr
(busy,delete) or *smsdel
AT^SM=ch,len,pdu,csum Request to send a message via GSM module 0..31
or via any GSM module (ch=32). Possible
answers: *smserr (busy,write) or *smsout
AT^SG=grp[/id],len,pdu,csum Request to send an SMS message via GSM
outgoing group 1..8. Possible answers: *smserr
(busy,write) or *smsout
AT^SS=ch,mem Command for an SMS storage change. Ch (0-31)
= module number. Mem (1;2;3) = SMS storage
type
SMS Storages
Siemens / Cinterion: 1=SM, 2=ME, 3=ME
Ericsson: 1=SM, 2=ME, 3=ME
Wavecom: 1=SM, 2=ME, 3=SR
Huawei: 1=SM, 2=SM, 3=SM
SierraWir.: 1=SM, 2=ME, 3=SR
Motorola: 1=IM, 2=IM, 3=IM
(SM = SIM card, ME = module, SR = status report memory, IM = inbox memory)