Before you start, Product completeness check, Connector lay-out (2-channel version) – 2N VoiceBlue Next v3.0 User Manual
Page 14: 1 before you start, Before you start 2.1
Before You Start
2.1
14
2.1 Before You Start
Caution
Make sure that you are equipped with all system components necessary
for putting 2N
®
VoiceBlue Next in operation (SIM card, VoIP phone and/or
duly configured SIP line of your SIP Proxy, an available 100BaseT socket
and a PC for initial settings).
Product Completeness Check
Before installing this product, check whether the 2N
®
VoiceBlue Next delivery complies
with the following packing list. Be careful because there may be differences in the
packing list depending on whether you have ordered a two-channel or four-channel
version of the 2N
®
VoiceBlue Next product (different part numbers).
Package
2ch VBN
4ch VBN
2N
®
VoiceBlue Next
1
1
Power supply adapter
1
1
Short antenna
1
None
Long antenna
1
1
Ethernet cable
1
1
2N CD User Manual and SW
1
1
Wall-mounting set
1
None
SIM card cover including screws
1
None
Rubber feet
None
4
Connector Lay-Out (2-Channel Version)
The following connectors are mounted on the 2N
®
VoiceBlue Next bottom:
Power supply connector – DC jack 2.1mm
10/100BaseT Ethernet connector
RESET button – press for a short time to restart the GSM gateway and for a long time
to restart the GSM gateway and download the factory settings.