At interface, Basic commands, S.4.2 – 2N VoiceBlue Next v3.0 User Manual
Page 69: 2 at interface, At interface 4.2
AT Interface
4.2
69
4.2 AT Interface
2N
®
VoiceBlue Next uses the list of AT commands derived from the standard AT set for
configuration and monitoring purposes.
The configuration entering commands start with AT%parameter_id.
The configuration writing out commands start with AT§ion.
The following list of AT commands is universal and some commands may not be
included in 2N
®
VoiceBlue Next.
Basic Commands
System
Information
ATI3
Firmware version and copyright
ATI4
Factory number
Statistics
AT&T
Statistics of calls via PRI interface
AT&TIN
Statistics of incoming calls via GSM modules
AT&TOUT
Statistics of outgoing calls via GSM modules
AT&T##
Statistics of calls via SIM cards of GSM module ##
AT%TPR=mi,ci,mo,co
Setting of statistics via PRI
AT%TG0=mi,ci,0,0
Setting of statistics of incoming calls via all GSM modules in GSM
group 0
AT%TG#=mi,co,ri,ro
Settings of statistics of GSM group #
AT%TGALL=mo.co,ri,ro
Settings of statistics of all GSM groups
AT%T##=#,mi,ci,si,mo,co,so
Settings of statistics of SIM card # of GSM module ##
AT%T##=ALL,mi,ci,si,mo,co,so
Settings of statistics of all SIM cards of GSM module ##
AT%TALL=ALL,mi,ci,si,mo,co,so
Settings of statistics of all SIM cards of all GSM modules
Description of parameters:
Mi/mo > Minutes of incom./outg. calls
Ci/co > number of connected incom./outg. calls
Ri/ro > number of re-routed incom/outg. calls in group
Si/so > number of received/sent SMS messages
! When you change these parameters, all the other counters will be reset!!
Wireless Engines
AT&Q##
Received GSM signal level (##=00-15)
AT&QALL
Received GSM signal level from all GSM modules
AT&Gxx=atcmd
Send command for AT commands directly to GSM module
AT&Gxx=at+cnum – SIM card telephone number
AT&Gxx=at+cpin=”xxxx” – PIN entering
AT&Gxx=at+clck=”sc”,1”xxxx” - PIN request enable
AT&Gxx=at+clck=”sc”,0”xxxx” - PIN request disable
LOG and CDR List
AT&L
Log file listing (PRIGW awaits pressing of the Space bar after every
20 lines)
AT&C
Call file listing (PRIGW awaits pressing of any key after every 20
lines)