2N StarGate/BlueTower v5.2 User Manual

Page 83

sent within a month via the selected SIM card.
Day of restoring call limit and delete statistics – select a day in a month on
which the Max count of called minutes and Count of SMS messages statistics
shall be deleted.
First count – set the length of the first pulse after which the pulse counting
change starts as defined in the Next count parameter.
Next count – set the length of one pulse in seconds after the time defined in the
First count parameter elapses.

Note

Set the two parameters above (

)

First count, Next count

properly to count free minutes on SIM cards correctly. These
parameters are used for limiting outgoing calls depending on
free minutes. The CDRs contain real data.

Day limit of called minutes – set the maximum count of minutes to be called
within a day via the selected SIM card.

set the interval to send AOC messages

AOC sending interval –

Time Limits

There are two SIM use time limits in a GSM group.

Call tariffs – use this function to assign up to four independent free minute counters
to a group of GSM modules (SIM cards), e.g.:

Tariff 1 = free minutes for calls to own GSM/UMTS network.
Tariff 2 = free minutes for calls to other GSM/UMTS networks.
Tariff 3 = free minutes for calls to fixed network.
Tariff 4 = free minutes for calls within a closed user group (VPN).

Complete the LCR table (assign prefixes to tariffs) properly to make full use of this
function. If routing to a tariff is not used, the global free minutes function will be used
in the LCR table.

Free minutes – set the free minutes for the tariff offered by the provider.
Transferred minutes – set the maximum count of free minutes to be
transferred to the next period.

set the interval to send AOC messages.

AOC sending interval –
Day of restoring free minutes – set a day on which the free minute counters
will be reset automatically. Select every 24 hours, a day in a month, or a day in a
week.
Week of restoring free minutes in month – set a week in which the free
minute counters will be reset automatically. Set the week number only if the
restoration takes place

in a month, e.g., or keep

for

every other Friday

Every

the other cases.

Caution

The recommended free minute counter value is X–5, where X is
the number of free minutes obtained from the GSM/UMTS
provider. Thus, you can avoid exceeding limits.

The manufacturer is not responsible for additional call costs
incurred as a result of exceeding your GSM/UMTS provider’s free
minute/SMS limit.