2N StarGate/BlueTower v5.2 - Manual (Page 71)

71
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Tip
A SIM card with a PIN code other than that set in the GSM
gateway configuration will be blocked with the „pin–err cause.
To unblock the so–rejected SIM card, enter the correct PIN on
your mobile phone!
End of dialling (empty=off) – a selectable DTMF code for DTMF dialling end in the
event of a DISA incoming call. The default value is „#.
List of Emergency Numbers
The window displays a list of emergency numbers, which are normally routed to the
PRI interface. If the PRI line is disconnected, the emergency numbers are dialled
automatically via any GSM/UMTS module according to the following rules:
Search of a logged–in GSM/UMTS module (regardless of free minutes);
Search of a blocked or network searching GSM/UMTS module.
The table includes an exact format of the number to be called (112,911, etc.). The ‘x’
placeholder stands for any digit in the number to be called. The ‘_’ placeholder means
the rest of the number. For example:
Format Allowed numbers
123 123 only
14x0 1400, 1410, 1420, ...1490
999_ All numbers starting with 999
VoIP Parameters
VoIP Functions
Day of deleting statistics on VoIP (every month) – set the day for automatic
deletion of call statistics via the VoIP interface. None = statistics will not be
deleted automatically.
SIP Settings
Use CLIP from INVITE field – define that CLIP from the ‘Contact’ or ‘From’
field shall be used for call routing to GSM/UMTS.
Send 180 ringing instead of 183 session progress.
Send 200 OK instead of 180/183.
Send 200 OK and BYE when rejected from GSM.
Send 200 OK on REGISTER request – virtual registration of device in 2N
®
gateway (for registration requiring equipment). StarGate / BlueTower
Replace CLIP from GSM with Caller ID.
Deny DTMF according to RFC2833.
Use SIP over TCP for registration.
Use SIP over TCP for calls.