2N StarGate/BlueTower v5.2 User Manual
Page 76
76
PRI Functions
– set this value to enable
Day of deleting statistics on PRI (every month)
deletion of statistic data on x–th day of a month.
– s
Digits count in SETUP (en–block)
et the number of digits to be sent in the
SETUP message as ENBLOCK. The others digits will be sent in the OVERLAP dial
mode. Example of use:
Called party number: 6012345678, digits count in SETUP = 7
Outgoing signalling messages: SETUP (contains 6012345)
INFO (6)
INFO (7)
INFO (8)
– with this parameter activated, the
Receive dial number from Subaddress
gateway uses the digits in the Subaddress field instead of the Called party
number for outgoing dialling.
– a specific feature designed for the
Hungarian dial tone after 2 digits
Hungarian national dialling plan. The gateway activates a specific dialtone for
second dialling after receiving two digits.
– when the ISDN PRI is in the TE mode, the
Don't send ConnectAck on TE
gateway will not send the CONNECT_ACK message.
Tone Signalling for Calls from ISDN
Dial tone to PRI1 with empty SETUP – set the dial tone type to be generated
by the PRI gateway.
Ring tone – set the ring tone type to be generated by the PRI gateway.
Generate busy tone to PRI1 – set the busy tone type to be generated by the
PRI gateway into the PRI 1 interface.
Generate busy tone to PRI2 – set the busy tone type to be generated by the
PRI gateway into the PRI 2 interface.
set the ring tone type to be generated by the
Ring tone from PRI1 to PRI2 –
PRI1 interface into the PRI 2 interface.
Numbering Plan Settings
– use these parameters to set the Numbering plan for the called
CDN, CGN
(CDN) and calling (CGN) numbers.
Binary value
Decimal value
Description
0000
0
Unknown numbering plan
0001
1
ISDN/Telephony numbering plan
0011
3
Sata numbering plan
0100
4
Telex numbering plan
1000
8
National standard numbering plan
1001
9
Private numbering plan
1111
15
Reserved for Extension