2N StarGate/BlueTower v5.2 - Manual (Page 100)

100
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Caution
The SNMP service works only if the following conditions are met:
The SNMP service is licensed and allowed in the Management
section.
The CPU access data are filled in correctly in the PRI gateway
section.
The primary IP address, source port and
parameter community
are filled in.
PRI Gateway
Here find the hypertext link to the CPU web interface.
SIM Client
Warning
This subsection is intended for earlier CPU versions only, which
did not provide the SIM Client service in the basic CPU. Your
new CPU offers the SIM Client service without requiring the
eCPU. Use this service please to make your system work
properly!
Call Simulator
The call simulator provides automatic generation of outgoing / incoming calls and SMS
messages. With these functions (Call simulator, SMS simulator) activated, the system
automatically (according to the predefined rules) sets up calls between the wireless
modules and also sends/receives predefined SMS to/from the wireless modules.
Caution
A valid licence is required for a correct function of the SMS and
Call simulators. You have to have a call simulator licence for the
Call simulator and an additional SMS licence for the SMS
simulator. While uploading the licence, check whether the
respective feature is enabled in the
menu. Management
By activating this function you may increase your call bill (real
calls and SMS).
It is necessary for you to know the phone numbers and IMSI of the SIM card used for a
correct function of the Call / SMS simulators. There are two ways of importing these
numbers to the system:
Using local IMSI / Phone list Prepare a CSV file (divided by space) for data
importing with all the required SIM card data.
230013001547875 731123446
230014120587987 605123446
Using remote database of 2N SIM Star Server
®
Add the remote server IP
address and the IP port (default is ). 12349 Make sure that this feature is also
enabled on ( 2N SIM Star Server
®
SIM server management > Connections
).