2N NetStar Assistant manual - Manual (Page 89)

89
None – display no line status information.
Announce missed calls– specify the type of missed call announcement.
Always – the Tray launcher displays information regardless of the currently
active call.
If no call is active only – the Tray launcher does not display information until
the active call ends.
Open Application upon Incoming CLIP
This menu section helps you set the application function that is able to recognise
incoming calls and identify the calling number, and open the appropriate application
according to the available settings. There are 5 tags in the application, which means
that up to 5 numbers can be specified and processed. The example below shows a
simple and frequent use with a door access communicator.
Suppose we have a door access communicator with an IP camera, e.g.
, with number 6254. The receptionist uses the Tray 2N Helios IP
®
lancher to see the CLIP and all missed calls. Set the application as
follows: enter the door communicator number 6254 into the 'upon
CLIP' field and let run a program able to launch streamed video. To do
so, specify the path to the program .exe file into Launch and enter the
door communicator address and the video stream protocol as the
parameter – rtsp://192.168.10.63. From now on, when this door
access communicator makes a call, a video player will be switched on
for the receptionist to see the person in front of the door.
Advanced
Click on the button to open an additional advanced setting menu of the Advanced
application. Refer to the text below for details.