2N NetStar Assistant manual - Manual (Page 67)

67
6.6 User Management
If you are assigned the User management rights, a different structure will be displayed
to you in the User settings menu. In addition to your own account, you can configure
accounts of other PBX users using a few windows as described below.
User Tree
Click on the User settings to display the User hierarchy and User tree, where you can
see each user, its group and stations. Click on an item to display the item settings. You
can change group names and click on stations to display their settings, refer to S.
4.
. Telephone Parameter Settings
Click on a user to open a special administration menu as shown in the figure below. It
is called the User panel. There you can easily set basic parameters for an account, such
as user name, language, password and profile, and enable automatic profile switching.
Tip
If a user forgets the password, you can change the user password
without knowing the old one. All you have to do is enter a new
password, confirm and save the change. From now on the user may
use this new password for login.
Click on Default to restore the default values or on Confirm changes to save the