2N NetStar Assistant manual - Manual (Page 75)

75
Caution!
Emergency alarm calls are not made to inactive stations!
Caution!
If the PBX is switched off after alarm activation and 2N NetStar
®
before alerting, e.g. due to power failure, re 2N NetStar Assistant
®
members the alarm activation and re-activates alarm in 40s after the
PBX emergency power on. If the PBX is switched off during alerting,
no alarm re-activation is made.
Station Management
You can use several controls to assign station parameters to apartments. See the
figure below. Let us provide some details.
Active – define whether or not a station should be active. An inactive station is
inaccessible to other users (all incoming calls are terminated), but can set up
calls.
Language – select the language version for the key system 2N StarPoint
®
phones.
Set alarm clock – push the button to activate the alarm clock service for a
station. The alarm clock setting window gets displayed.