2N NetStar Assistant manual - Manual (Page 44)

44
4.4 Other Terminal Parameter Settings
Basic
There are limited options for other telephones that can be connected to the 2N
®
PBX. Click on the menu and select the required station. The NetStar Telephones
following menu gets displayed with one or two tags (depending on the telephone type).
This tag is displayed for all other telephone types that can be connected (IP, analogue,
ISDN and GSM).
Station active – use the option to mark a station as active or inactive. An
inactive station is inaccessible for other users (all incoming calls are terminated),
but can set up calls.
Mobility Extension – use the option to enable station ringing if the call is routed
to the station user. If this option is not checked off, the station is not alerted
when the call is routed to its user but is alerted when the call is routed to the
station itself.
Enable CLIR – use to parameter to restrict the calling line identification. You can
also use a service or a programmable button function of the key system phone to
enable CLIR.
Alarm clock – use the option to set the alarm service for a user station. Click on
Set alarm clock to display a window to set the date, time and user station to be
called at the set time by the PBX. If the first incoming call is not 2N NetStar
®
answered, two more calls will be made. Push Cancel alarm clock to deactivate the
alarm.