2N NetStar Assistant manual - Manual (Page 17)

17
3.2 Personal Profile
Click on the User settings menu and then on Personal profiles, or on the Profile toolbar
item to work with user profiles. You will be forwarded to the Personal profiles page.
There is a table with your profiles in the upper part of the screen, where you can
activate, edit or delete a profile. Click on Add personal profile to create a new profile.
The maximum count of profiles per user is eight.
Press Edit to modify an existing profile or set a new one. You get into the Modify
personal profile window, where you can change the profile name and/or number. Doing
so, make sure that the profile numbers are not identical. You will be notified of an error
if any. In addition, you can make assignment to bundles that have been made
accessible to you by the Administrator or bundle Manager. Once defined, the user call
message will be displayed to the calling users on their key system 2N StarPoint
®
phones. Once defined, the state will be displayed in the connected 2N NetStar
®
and applications. It can also be used for state Operator 2N NetStar Communicator
®
mapping according to MS Outlook calendars in the above mentioned applications. Once
defined, the VoiceMail welcome note will be played to the people using your VoiceMail
system. Use the Call recording item to specify the type of recording for a selected
profile. Click on Modify to confirm and save the changes. If you are not sure, click on
Default to restore the factory settings.