2N SmartGate - User Manual - Manual (Page 34)

29
Add
The Add parameter is used for automatic call routing. A defined string (prefix) is
added to the beginning of the number to be dialed.
Setting options: 0-16 characters (0-9,*,#,+)
Default setting: blank
Extra tariff
Pseudo tariff metering setting (tariff is based on call duration) for GSM calls.
Connected PBX must send tariff metering pulses for FXO calls. The Extra tariff
parameter defines transmitting of fixed quantity of tariff pulses after call start. This
parameter sets minimal call cost.
Setting options: 0-255
Setting step:
1
Default setting: 0
Tariff [s]
Pseudo tariff metering setting (tariff is based on call duration) for GSM calls.
Connected PBX must send tariff metering pulses for FXO calls. The Tariff
parameter sets the call cost according to call duration. Set how often in seconds
do you want to transmit pulses. Smaller number means more expansive call. 0
means not to transmit pulses according to call duration.
Setting options: 0-255 s
Setting step: 1 s
Default setting: 0 s