JLG 600SC_660SJC ANSI Service Manual - Manual (Page 16)

SECTION 1 - SPECIFICATIONS
1-4 – JLG Lift – 3120794
Hydraulic Oil
NOTE: Hydraulic oils must have anti-wear qualities at least
to API Service Classification GL-3, and sufficient
chemical stability for mobile hydraulic system ser-
vice. JLG Industries recommends Mobilfluid 424
hydraulic oil, which has an SAE viscosity index of
152 .
NOTE: When temperatures remain below 20° F (-7 degrees
C), JLG Industries recommends the use of Mobil
DTE 13M.
Aside from JLG recommendations, it is not advisable to
mix oils of different brands or types, as they may not con-
tain the same required additives or be of comparable vis-
cosities. If use of hydraulic oil other than Mobilfluid 424 is
desired, contact JLG Industries for proper recommenda-
tions.
Lubrication Specifications
1.7 PRESSURE SETTINGS
Main Relief - 3000 PSI (206.85 Bar).
Upper Boom Lift Down - 1500 PSI (103.4 Bar).
Swing - 1700 PSI (117.2 Bar).
Platform Level Forward - 2800 PSI (193.06 Bar).
Backward - 1800 PSI (124.11 Bar).
Articulating Jib Boom Up - 1500 PSI (103 Bar).
Down - 1200 PSI (82.7 Bar).
Table 1-3. Hydraulic Oil
HYDRAULIC SYSTEM
OPERATING
TEMPERATURE RANGE
SAE VISCOSITY GRADE
+0° to +180° F (-18° C to
+83° C)
10W
+0° F to +210° F (-18° C to
+99° C)
10W-20, 10W-30
+50° F to +210° F (+10° C to
+210° C)
20W-20
Table 1-4. Mobil DTE 13M Specs
ISO Viscosity Grade #32
Specific Gravity 0.877
Pour Point, Max -40 F (-40 C)
Flash Point, Min. 330 F (166 C)
Viscosity
at 40° C 33cSt
at 100° C 6.6 cSt
at 100° F 169 SUS
at 210° F 48 SUS
cp at -20° F 6,200
Viscosity Index 140
Table 1-5. Lubrication Specifications
KEY SPECIFICATIONS
MPG Multipurpose Grease having a mini-
mum dripping point of 350° F. Excel-
lent water resistance and adhesive
qualities, and being of extreme pres-
sure type.
(Timken OK 40 pounds minimum.)
EPGL Extreme Pressure Gear Lube (oil)
meeting API service classification
GL-5 or MIL-Spec MIL-L-2105
HO Hydraulic Oil. API service classifica-
tion GL-3, e.g. Mobilfluid 424.
EO Engine (crankcase) Oil. Gas - API SF,
SH, SG class, MIL-L-2104. Diesel -
API CC/CD class, MIL-L-2104B/MIL-
L-2104C.
NOTE: Refer to Lubrication Chart, for specific lubrication
procedures.